vortiusb.blogg.se - Termius error 125

#TERMIUS ERROR 125 INSTALL#
#TERMIUS ERROR 125 DRIVER#

Generally seen when running make after running the autogen line with a zero instead of a "O" capital o. Read the last few outputted lines from the command before make. Generated by a failure in the autogen command. Q: What is causes message: "make: *** No targets specified and no makefile found.

If you see the frequency drop as soon as it starts up, you can use a modified version of AsicBoost "-gekko-lowboost" or disable asicboost with the command above.

If you receive shared rejected messages from a specific pool, you can disable asicboost with "-gekko-noboost".

How can I set a different frequency for the R606 vs NewPac vs 2Pac vs the Compac?Ĭgminer will accept a custom frequency per device type. Non cooled sticks are subject to thermal runaway where heat will trigger increased amperage draw increasing heat in a cycle until the unit fails. Increased cooling can reduce the chip's overall power usage. If you run a stick miner, use a cooling fan. If all is well, you can list and see the miner from cgminer.

#TERMIUS ERROR 125 INSTALL#

Install the zadig generic WinUSB drivers from: Use 7zip or WinZip to extract the archive Windows : cgminer.exe (download and extract the 7z file below)Ĭross compiling instructions can be found in the next post. #see Q&A further below for instruction to grant USB permission to non root accounts.

Sudo apt-get install -y build-essential git libusb-1.0-0-dev libusb-1.0-0 libcurl4-openssl-dev libncurses5-dev libudev-dev screen libtool automake pkg-config libjansson-dev

cgminer -o stratum+tcp://:3333 -u 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr -p x -suggest-diff 128Ĭgminer.exe -o stratum+tcp://:3333 -u 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr -p x -suggest-diff 128Ĭgminer -o stratum+tcp://:3333 -u 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr -p x -suggest-diff 128

#TERMIUS ERROR 125 DRIVER#

The driver is under active development in an fork of ckolivas/cgminer.Ī pull request will be redirected to the ckolivas/cgminer repo once the code approached a stable point. The expected performance of the R606 is about 1.368 * MHz = GH.Īt the default frequency of 400MHz, the R606 runs at 547.2 GH.Īt the moment, you will need to a build of cgminer with the latest gekko driver to mine with the NewPac / R606. Rough power usage and efficiency of a NewPac: The expected performance of the NewPac is about 0.228 * MHz = GH.Īt the default frequency of 100MHz, the NewPac runs at 22.8 GH. Limited direct sales are also available contact for information.